Po redaktohet Moduli:string utilities

local export = {}

local function_module = "Module:fun"
local load_module = "Module:load"
local memoize_module = "Module:memoize"
local string_char_module = "Module:string/char"
local string_charset_escape_module = "Module:string/charsetEscape"

local mw = mw
local string = string
local table = table
local ustring = mw.ustring

local byte = string.byte
local char = string.char
local concat = table.concat
local find = string.find
local format = string.format
local gmatch = string.gmatch
local gsub = string.gsub
local insert = table.insert
local len = string.len
local lower = string.lower
local match = string.match
local next = next
local require = require
local reverse = string.reverse
local select = select
local sort = table.sort
local sub = string.sub
local tonumber = tonumber
local tostring = tostring
local type = type
local ucodepoint = ustring.codepoint
local ufind = ustring.find
local ugcodepoint = ustring.gcodepoint
local ugmatch = ustring.gmatch
local ugsub = ustring.gsub
local ulower = ustring.lower
local umatch = ustring.match
local unpack = unpack or table.unpack -- Lua 5.2 compatibility
local upper = string.upper
local usub = ustring.sub
local uupper = ustring.upper

local memoize = require(memoize_module)

-- Defined below.
local codepoint
local explode_utf8
local format_fun
local get_charset
local gsplit
local pattern_escape
local pattern_simplifier
local replacement_escape
local title_case
local trim
local ucfirst
local ulen

--[==[
Loaders for functions in other modules, which overwrite themselves with the target function when called. This ensures
modules are only loaded when needed, retains the speed/convenience of locally-declared pre-loaded functions, and has no
overhead after the first call, since the target functions are called directly in any subsequent calls.
]==]
local function charset_escape(...)
	charset_escape = require(string_charset_escape_module)
	return charset_escape(...)
end

local function is_callable(...)
	is_callable = require(function_module).is_callable
	return is_callable(...)
end

local function load_data(...)
	load_data = require(load_module).load_data
	return load_data(...)
end

local function u(...)
	u = require(string_char_module)
	return u(...)
end

local function prepare_iter(str, pattern, str_lib, plain)
	local callable = is_callable(pattern)
	if str_lib or plain then
		return pattern, #str, string, callable
	elseif not callable then
		local simple = pattern_simplifier(pattern)
		if simple then
			return simple, #str, string, false
		end
	end
	return pattern, ulen(str), ustring, callable
end

--[==[
Returns {nil} if the input value is the empty string, or otherwise the same value.

If the input is a string and `do_trim` is set, the input value will be trimmed before returning; if the trimmed value is
the empty string, returns {nil}.

If `quote_delimiters` is set, then any outer pair of quotation marks ({' '} or {" "}) surrounding the rest of the input
string will be stripped, if present. The string will not be trimmed again, converted to {nil}, or have further quotation
marks stripped, as it exists as a way to embed spaces or the empty string in an input. Genuine quotation marks may also
be embedded this way (e.g. {"''foo''"} returns {"'foo'"}).
]==]
function export.is_not_empty(str, do_trim, quote_delimiters)
	if str == "" then
		return nil
	elseif not (str and type(str) == "string") then
		return str
	elseif do_trim then
		str = trim(str)
		if str == "" then
			return nil
		end
	end
	return quote_delimiters and gsub(str, "^(['\"])(.*)%1$", "%2") or str
end

--[==[
Explodes a string into an array of UTF-8 characters. '''Warning''': this function assumes that the input is valid UTF-8
in order to optimize speed and memory use. Passing in an input containing non-UTF-8 byte sequences could result in
unexpected behaviour.
]==]
function export.explode_utf8(str)
	local text, i = {}, 0
	for ch in gmatch(str, ".[\128-\191]*") do
		i = i + 1
		text[i] = ch
	end
	return text
end
explode_utf8 = export.explode_utf8

--[==[
Returns {true} if `str` is a valid UTF-8 string. This is true if, for each character, all of the following are true:
* It has the expected number of bytes, which is determined by value of the leading byte: 1-byte characters are `0x00` to
  `0x7F`, 2-byte characters start with `0xC2` to `0xDF`, 3-byte characters start with `0xE0` to `0xEF`, and 4-byte
  characters start with `0xF0` to `0xF4`.
* The leading byte must not fall outside of the above ranges.
* The trailing byte(s) (if any), must be between `0x80` to `0xBF`.
* The character's codepoint must be between U+0000 (`0x00`) and U+10FFFF (`0xF4 0x8F 0xBF 0xBF`).
* The character cannot have an overlong encoding: for each byte length, the lowest theoretical encoding is equivalent to
  U+0000 (e.g. `0xE0 0x80 0x80`, the lowest theoretical 3-byte encoding, is exactly equivalent to U+0000). Encodings
  that use more than the minimum number of bytes are not considered valid, meaning that the first valid 3-byte
  character is `0xE0 0xA0 0x80` (U+0800), and the first valid 4-byte character is `0xF0 0x90 0x80 0x80` (U+10000).
  Formally, 2-byte characters have leading bytes ranging from `0xC0` to `0xDF` (rather than `0xC2` to `0xDF`), but
  `0xC0 0x80` to `0xC1 0xBF` are overlong encodings, so it is simpler to say that the 2-byte range begins at `0xC2`.

If `allow_surrogates` is set, surrogates (U+D800 to U+DFFF) will be treated as valid UTF-8. Surrogates are used in
UTF-16, which encodes codepoints U+0000 to U+FFFF with 2 bytes, and codepoints from U+10000 upwards using a pair of
surrogates, which are taken together as a 4-byte unit. Since surrogates have no use in UTF-8, as it encodes higher
codepoints in a different way, they are not considered valid in UTF-8 text. However, there are limited circumstances
where they may be necessary: for instance, JSON escapes characters using the format `\u0000`, which must contain exactly
4 hexadecimal digits; under the scheme, codepoints above U+FFFF must be escaped as the equivalent pair of surrogates,
even though the text itself must be encoded in UTF-8 (e.g. U+10000 becomes `\uD800\uDC00`).
]==]
function export.isutf8(str, allow_surrogates)
	for ch in gmatch(str, "[\128-\255][\128-\191]*") do
		if #ch > 4 then
			return false
		end
		local b1, b2, b3, b4 = byte(ch, 1, 4)
		if not (b2 and b2 >= 0x80 and b2 <= 0xBF) then
			return false -- 1-byte is always invalid, as gmatch excludes 0x00 to 0x7F
		elseif not b3 then -- 2-byte
			if not (b1 >= 0xC2 and b1 <= 0xDF) then -- b1 == 0xC0 or b1 == 0xC1 is overlong
				return false
			end
		elseif not (b3 >= 0x80 and b3 <= 0xBF) then -- trailing byte
			return false
		elseif not b4 then -- 3-byte
			if b1 > 0xEF then
				return false
			elseif b2 < 0xA0 then
				if b1 < 0xE1 then -- b1 == 0xE0 and b2 < 0xA0 is overlong
					return false
				end
			elseif b1 < 0xE0 or (b1 == 0xED and not allow_surrogates) then -- b1 == 0xED and b2 >= 0xA0 is a surrogate
				return false
			end
		elseif not (b4 >= 0x80 and b4 <= 0xBF) then -- 4-byte
			return false
		elseif b2 < 0x90 then
			if not (b1 >= 0xF1 and b1 <= 0xF4) then -- b1 == 0xF0 and b2 < 0x90 is overlong
				return false
			end
		elseif not (b1 >= 0xF0 and b1 <= 0xF3) then -- b1 == 0xF4 and b2 >= 0x90 is too high
			return false
		end
	end
	return true
end

do
	local charset_chars = {
		["\0"] = "%z", ["%"] = "%%", ["-"] = "%-", ["]"] = "%]", ["^"] = "%^"
	}
	charset_chars.__index = charset_chars
	
	local chars = setmetatable({
		["$"] = "%$", ["("] = "%(", [")"] = "%)", ["*"] = "%*", ["+"] = "%+",
		["."] = "%.", ["?"] = "%?", ["["] = "%["
	}, charset_chars)

	--[==[
	Escapes the magic characters used in a [[mw:Extension:Scribunto/Lua reference manual#Patterns|pattern]] (Lua's
	version of regular expressions): {$%()*+-.?[]^}, and converts the null character to {%z}. For example,
	{"^$()%.[]*+-?\0"} becomes {"%^%$%(%)%%%.%[%]%*%+%-%?%z"}. This is necessary when constructing a pattern involving
	arbitrary text (e.g. from user input).
	]==]
	function export.pattern_escape(str)
		return (gsub(str, "[%z$%%()*+%-.?[%]^]", chars))
	end
	pattern_escape = export.pattern_escape

	--[==[
	Escapes only {%}, which is the only magic character used in replacement
	[[mw:Extension:Scribunto/Lua reference manual#Patterns|patterns]] with string.gsub and mw.ustring.gsub.
	]==]
	function export.replacement_escape(str)
		return (gsub(str, "%%", "%%%%"))
	end
	replacement_escape = export.replacement_escape

	local function case_insensitive_char(ch)
		local upper_ch = uupper(ch)
		if upper_ch == ch then
			ch = ulower(ch)
			if ch == upper_ch then
				return chars[ch] or ch
			end
		end
		return "[" .. (charset_chars[upper_ch] or upper_ch) .. (charset_chars[ch] or ch) .. "]"
	end

	local function iterate(str, str_len, text, n, start, _gsub, _sub, loc1, loc2)
		if not (loc1 and start <= str_len) then
			-- Add final chunk and return.
			n = n + 1
			text[n] = _gsub(_sub(str, start), ".", chars)
			return
		elseif loc2 < loc1 then
			if _sub == sub then
				local b = byte(str, loc1)
				if b and b >= 128 then
					loc1 = loc1 + (b < 224 and 1 or b < 240 and 2 or 3)
				end
			end
			n = n + 1
			text[n] = _gsub(_sub(str, start, loc1), ".", chars)
			start = loc1 + 1
			if start > str_len then
				return
			end
		else
			-- Add chunk up to the current match.
			n = n + 1
			text[n] = _gsub(_sub(str, start, loc1 - 1), ".", chars)
			-- Add current match.
			n = n + 1
			text[n] = _gsub(_sub(str, loc1, loc2), ".", case_insensitive_char)
			start = loc2 + 1
		end
		return n, start
	end

	--[==[
	Escapes the magic characters used in a [[mw:Extension:Scribunto/Lua reference manual#Patterns|pattern]], and makes
	all characters case-insensitive. An optional pattern or find function (see {split}) may be supplied as the second
	argument, the third argument (`str_lib`) forces use of the string library, while the fourth argument (`plain`) turns
	any pattern matching facilities off in the optional pattern supplied.
	]==]
	function export.case_insensitive_pattern(str, pattern_or_func, str_lib, plain)
		if pattern_or_func == nil then
			return (gsub(str, str_lib and "[^\128-\255]" or ".[\128-\191]*", case_insensitive_char))
		end
		
		local text, n, start, str_len, _string, callable = {}, 0, 1
		pattern_or_func, str_len, _string, callable = prepare_iter(str, pattern_or_func, str_lib, plain)
		local _find, _gsub, _sub = _string.find, _string.gsub, _string.sub
		
		if callable then
			repeat
				n, start = iterate(str, str_len, text, n, start, _gsub, _sub, pattern_or_func(str, start))
			until not start
		-- Special case if the pattern is anchored to the start: "^" always
		-- anchors to the start position, not the start of the string, so get
		-- around this by only attempting one match with the pattern, then match
		-- the end of the string.
		elseif byte(pattern_or_func) == 0x5E then -- ^
			n, start = iterate(str, str_len, text, n, start, _gsub, _sub, _find(str, pattern_or_func, start, plain))
			if start ~= nil then
				iterate(str, str_len, text, n, start, _gsub, _sub, _find(str, "$", start, plain))
			end
		else
			repeat
				n, start = iterate(str, str_len, text, n, start, _gsub, _sub, _find(str, pattern_or_func, start, plain))
			until not start
		end
		
		return concat(text)
	end
end

do
	local character_classes
	local function get_character_classes()
		character_classes, get_character_classes = {
			[0x41] = true, [0x61] = true, -- Aa
			[0x43] = true, [0x63] = true, -- Cc
			[0x44] = true, [0x64] = true, -- Dd
			[0x4C] = true, [0x6C] = true, -- Ll
			[0x50] = true, [0x70] = true, -- Pp
			[0x53] = true, [0x73] = true, -- Ss
			[0x55] = true, [0x75] = true, -- Uu
			[0x57] = true, [0x77] = true, -- Ww
			[0x58] = true, [0x78] = true, -- Xx
			[0x5A] = true, -- z dealt with separately.
		}, nil
		return character_classes
	end
	
	local function check_sets_equal(set1, set2)
		local k2
		for k1, v1 in next, set1 do
			local v2 = set2[k1]
			if v1 ~= v2 and (v2 == nil or not check_sets_equal(v1, v2)) then
				return false
			end
			k2 = next(set2, k2)
		end
		return next(set2, k2) == nil
	end
	
	local function check_sets(bytes)
		local key, set1, set = next(bytes)
		if set1 == true then
			return true
		elseif not check_sets(set1) then
			return false
		end
		while true do
			key, set = next(bytes, key)
			if not key then
				return true
			elseif not check_sets_equal(set, set1) then
				return false
			end
		end
	end
	
	local function make_charset(range)
		if #range == 1 then
			return char(range[1])
		end
		sort(range)
		local compressed, n, start = {}, 0, range[1]
		for i = 1, #range do
			local this, nxt = range[i], range[i + 1]
			if nxt ~= this + 1 then
				n = n + 1
				compressed[n] = this == start and char(this) or
					char(start) .. "-" .. char(this)
				start = nxt
			end
		end
		return "[" .. concat(compressed) .. "]"
	end
	
	local function parse_1_byte_charset(pattern, pos)
		local ch
		while true do
			pos, ch = match(pattern, "()([%%%]\192-\255])", pos)
			if ch == "%" then
				local nxt = byte(pattern, pos + 1)
				if not nxt or nxt >= 128 or (character_classes or get_character_classes())[nxt] then -- acdlpsuwxACDLPSUWXZ, but not z
					return false
				end
				pos = pos + 2
			elseif ch == "]" then
				pos = pos + 1
				return pos
			else
				return false
			end
		end
	end
	
	--[==[
	Parses `pattern`, a ustring library pattern, and attempts to convert it into a string library pattern. If conversion
	isn't possible, returns false.
	]==]
	function pattern_simplifier(pattern)
		if type(pattern) == "number" then
			return tostring(pattern)
		end
		local pos, capture_groups, start, n, output, ch, nxt_pos = 1, 0, 1, 0
		while true do
			-- FIXME: use "()([%%(.[\128-\255])[\128-\191]?[\128-\191]?[\128-\191]?()" and ensure non-UTF8 always fails.
			pos, ch, nxt_pos = match(pattern, "()([%%(.[\192-\255])[\128-\191]*()", pos)
			if not ch then
				break
			end
			local nxt = byte(pattern, nxt_pos)
			if ch == "%" then
				if nxt == 0x62 then -- b
					local nxt2, nxt3 = byte(pattern, pos + 2, pos + 3)
					if not (nxt2 and nxt2 < 128 and nxt3 and nxt3 < 128) then
						return false
					end
					pos = pos + 4
				elseif nxt == 0x66 then -- f
					nxt_pos = nxt_pos + 2
					local nxt2, nxt3 = byte(pattern, nxt_pos - 1, nxt_pos)
					-- Only possible to convert a positive %f charset which is
					-- all ASCII, so use parse_1_byte_charset.
					if not (nxt2 == 0x5B and nxt3 and nxt3 ~= 0x5E and nxt3 < 128) then -- [^
						return false
					elseif nxt3 == 0x5D then -- Initial ] is non-magic.
						nxt_pos = nxt_pos + 1
					end
					pos = parse_1_byte_charset(pattern, nxt_pos)
					if not pos then
						return false
					end
				elseif nxt == 0x5A then -- Z
					nxt = byte(pattern, nxt_pos + 1)
					if nxt == 0x2A or nxt == 0x2D then -- *-
						pos = pos + 3
					else
						if output == nil then
							output = {}
						end
						local ins = sub(pattern, start, pos - 1) .. "[\1-\127\192-\255]"
						n = n + 1
						if nxt == 0x2B then -- +
							output[n] = ins .. "%Z*"
							pos = pos + 3
						elseif nxt == 0x3F then -- ?
							output[n] = ins .. "?[\128-\191]*"
							pos = pos + 3
						else
							output[n] = ins .. "[\128-\191]*"
							pos = pos + 2
						end
						start = pos
					end
				elseif not nxt or (character_classes or get_character_classes())[nxt] then -- acdlpsuwxACDLPSUWX, but not Zz
					return false
				-- Skip the next character if it's ASCII. Otherwise, we will
				-- still need to do length checks.
				else
					pos = pos + (nxt < 128 and 2 or 1)
				end
			elseif ch == "(" then
				if nxt == 0x29 or capture_groups == 32 then -- )
					return false
				end
				capture_groups = capture_groups + 1
				pos = pos + 1
			elseif ch == "." then
				if nxt == 0x2A or nxt == 0x2D then -- *-
					pos = pos + 2
				else
					if output == nil then
						output = {}
					end
					local ins = sub(pattern, start, pos - 1) .. "[^\128-\191]"
					n = n + 1
					if nxt == 0x2B then -- +
						output[n] = ins .. ".*"
						pos = pos + 2
					elseif nxt == 0x3F then -- ?
						output[n] = ins .. "?[\128-\191]*"
						pos = pos + 2
					else
						output[n] = ins .. "[\128-\191]*"
						pos = pos + 1
					end
					start = pos
				end
			elseif ch == "[" then
				-- Fail negative charsets. TODO: 1-byte charsets should be safe.
				if nxt == 0x5E then -- ^
					return false
				-- If the first character is "%", ch_len is determined by the
				-- next one instead.
				elseif nxt == 0x25 then -- %
					nxt = byte(pattern, nxt_pos + 1)
				elseif nxt == 0x5D then -- Initial ] is non-magic.
					nxt_pos = nxt_pos + 1
				end
				if not nxt then
					return false
				end
				local ch_len = nxt < 128 and 1 or nxt < 224 and 2 or nxt < 240 and 3 or 4
				if ch_len == 1 then -- Single-byte charset.
					pos = parse_1_byte_charset(pattern, nxt_pos)
					if not pos then
						return false
					end
				else -- Multibyte charset.
					-- TODO: 1-byte chars should be safe to mix with multibyte chars. CONFIRM THIS FIRST.
					local charset_pos, bytes = pos
					pos = pos + 1
					while true do -- TODO: non-ASCII charset ranges.
						pos, ch, nxt_pos = match(pattern, "^()([^\128-\191])[\128-\191]*()", pos)
						-- If escaped, get the next character. No need to
						-- distinguish magic characters or character classes,
						-- as they'll all fail for having the wrong length
						-- anyway.
						if ch == "%" then
							pos, ch, nxt_pos = match(pattern, "^()([^\128-\191])[\128-\191]*()", nxt_pos)
						elseif ch == "]" then
							pos = nxt_pos
							break
						end
						if not (ch and nxt_pos - pos == ch_len) then
							return false
						elseif bytes == nil then
							bytes = {}
						end
						local bytes, last = bytes, nxt_pos - 1
						for i = pos, last - 1 do
							local b = byte(pattern, i)
							local bytes_b = bytes[b]
							if bytes_b == nil then
								bytes_b = {}
								bytes[b] = bytes_b
							end
							bytes[b], bytes = bytes_b, bytes_b
						end
						bytes[byte(pattern, last)] = true
						pos = nxt_pos
					end
					if not pos then
						return false
					end
					nxt = byte(pattern, pos)
					if (
						(nxt == 0x2A or nxt == 0x2D or nxt == 0x3F) or -- *-?
						(nxt == 0x2B and ch_len > 2) or -- +
						not check_sets(bytes)
					) then
						return false
					end
					local ranges, b, key, next_byte = {}, 0
					repeat
						key, next_byte = next(bytes)
						local range, n = {key}, 1
						-- Loop starts on the second iteration.
						for key in next, bytes, key do
							n = n + 1
							range[n] = key
						end
						b = b + 1
						ranges[b] = range
						bytes = next_byte
					until next_byte == true
					if nxt == 0x2B then -- +
						local range1, range2 = ranges[1], ranges[2]
						ranges[1], ranges[3] = make_charset(range1), make_charset(range2)
						local n = #range2
						for i = 1, #range1 do
							n = n + 1
							range2[n] = range1[i]
						end
						ranges[2] = make_charset(range2) .. "*"
						pos = pos + 1
					else
						for i = 1, #ranges do
							ranges[i] = make_charset(ranges[i])
						end
					end
					if output == nil then
						output = {}
					end
					nxt = byte(pattern, pos)
					n = n + 1
					output[n] = sub(pattern, start, charset_pos - 1) .. concat(ranges) ..
						((nxt == 0x2A or nxt == 0x2B or nxt == 0x2D or nxt == 0x3F) and "%" or "") -- following *+-? now have to be escaped
					start = pos
				end
			elseif not nxt then
				break
			elseif nxt == 0x2B then -- +
				if nxt_pos - pos ~= 2 then
					return false
				elseif output == nil then
					output = {}
				end
				pos, nxt_pos = pos + 1, nxt_pos + 1
				nxt = byte(pattern, nxt_pos)
				local ch2 = sub(pattern, pos, pos)
				n = n + 1
				output[n] = sub(pattern, start, pos - 1) .. "[" .. ch .. ch2 .. "]*" .. ch2 ..
					((nxt == 0x2A or nxt == 0x2B or nxt == 0x2D or nxt == 0x3F) and "%" or "") -- following *+-? now have to be escaped
				pos, start = nxt_pos, nxt_pos
			elseif nxt == 0x2A or nxt == 0x2D or nxt == 0x3F then -- *-?
				return false
			else
				pos = nxt_pos
			end
		end
		if start == 1 then
			return pattern
		end
		return concat(output) .. sub(pattern, start)
	end
	pattern_simplifier = memoize(pattern_simplifier, true)
	export.pattern_simplifier = pattern_simplifier
end

--[==[
Parses `charset`, the interior of a string or ustring library character set, and normalizes it into a string or ustring
library pattern (e.g. {"abcd-g"} becomes {"[abcd-g]"}, and {"[]"} becomes {"[[%]]"}).

The negative (`^`), range (`-`) and literal (`%`) magic characters work as normal, and character classes may be used
(e.g. `%d` and `%w`), but opening and closing square brackets are sanitized so that they behave like ordinary
characters.
]==]
function get_charset(charset)
	if type(charset) == "number" then
		return tostring(charset)
	end
	local pos, start, n, output = 1, 1, 0
	if byte(charset) == 0x5E then -- ^
		pos = pos + 1
	end
	 -- FIXME: "]" is non-magic if it's the first character in a charset.
	local nxt_pos, nxt
	while true do
		local new_pos, ch = match(charset, "()([%%%-%]])", pos)
		if not ch then
			break
		-- Skip percent escapes. Ranges can't start with them, either.
		elseif ch == "%" then
			pos = new_pos + 2
		else
			-- If `ch` is a hyphen, get the character before iff it's at or ahead of `pos`.
			if ch == "-" and new_pos > pos then
				pos, nxt_pos, nxt = new_pos - 1, new_pos, ch
				ch = sub(charset, pos, pos)
			else
				pos, nxt_pos = new_pos, new_pos + 1
				nxt = sub(charset, nxt_pos, nxt_pos)
			end
			-- Range.
			if nxt == "-" then 
				if output == nil then
					output = {}
				end
				n = n + 1
				output[n] = sub(charset, start, pos - 1)
				nxt_pos = nxt_pos + 1
				nxt = sub(charset, nxt_pos, nxt_pos)
				-- Ranges fail if they end with a percent escape, so escape the hyphen to avoid undefined behaviour.
				if nxt == "" or nxt == "%" then
					n = n + 1
					output[n] = (ch == "]" and "%]" or ch) .. "%-"
					start = nxt_pos
					nxt_pos = nxt_pos + 2
				-- Since ranges can't contain "%]", since it's escaped, range inputs like "]-z" or "a-]" must be
				-- adjusted to the character before or after, plus "%]" (e.g. "%]^-z" or "a-\\%]"). The escaped "%]" is
				-- omitted if the range would be empty (i.e. if the first byte is greater than the second).
				else
					n = n + 1
					output[n] = (ch == "]" and (byte(nxt) >= 0x5D and "%]^" or "^") or ch) .. "-" ..
						(nxt == "]" and (byte(ch) <= 0x5D and "\\%]" or "\\") or nxt)
					nxt_pos = nxt_pos + 1
					start = nxt_pos
				end
			elseif ch == "-" or ch == "]" then
				if output == nil then
					output = {}
				end
				n = n + 1
				output[n] = sub(charset, start, pos - 1) .. "%" .. ch
				start = nxt_pos
			end
			pos = nxt_pos
		end
	end
	if start == 1 then
		return "[" .. charset .. "]"
	end
	return "[" .. concat(output) .. sub(charset, start) .. "]"
end
get_charset = memoize(get_charset, true)
export.get_charset = get_charset

function export.len(str)
	return type(str) == "number" and len(str) or
		#str - #gsub(str, "[^\128-\191]+", "")
end
ulen = export.len

function export.sub(str, i, j)
	str, i = type(str) == "number" and tostring(str) or str, i or 1
	if i < 0 or j and j < 0 then
		return usub(str, i, j)
	elseif j and i > j or i > #str then
		return ""
	end
	local n, new_i = 0
	for loc1, loc2 in gmatch(str, "()[^\128-\191]+()[\128-\191]*") do
		n = n + loc2 - loc1
		if not new_i and n >= i then
			new_i = loc2 - (n - i) - 1
			if not j then
				return sub(str, new_i)
			end
		end
		if j and n > j then
			return sub(str, new_i, loc2 - (n - j) - 1)
		end
	end
	return new_i and sub(str, new_i) or ""
end

do
	local function _find(str, loc1, loc2, ...)
		if loc1 and not match(str, "^()[^\128-\255]*$") then
			-- Use raw values of loc1 and loc2 to get loc1 and the length of the match.
			loc1, loc2 = ulen(sub(str, 1, loc1)), ulen(sub(str, loc1, loc2))
			-- Offset length with loc1 to get loc2.
			loc2 = loc1 + loc2 - 1
		end
		return loc1, loc2, ...
	end
	
	--[==[A version of find which uses string.find when possible, but otherwise uses mw.ustring.find.]==]
	function export.find(str, pattern, init, plain)
		init = init or 1
		if init ~= 1 and not match(str, "^()[^\128-\255]*$") then
			return ufind(str, pattern, init, plain)
		elseif plain then
			return _find(str, find(str, pattern, init, true))
		end
		local simple = pattern_simplifier(pattern)
		if simple then
			return _find(str, find(str, simple, init))
		end
		return ufind(str, pattern, init)
	end
end

--[==[A version of match which uses string.match when possible, but otherwise uses mw.ustring.match.]==]
function export.match(str, pattern, init)
	init = init or 1
	if init ~= 1 and not match(str, "^()[^\128-\255]*$") then
		return umatch(str, pattern, init)
	end
	local simple = pattern_simplifier(pattern)
	if simple then
		return match(str, simple, init)
	end
	return umatch(str, pattern, init)
end

--[==[A version of gmatch which uses string.gmatch when possible, but otherwise uses mw.ustring.gmatch.]==]
function export.gmatch(str, pattern)
	local simple = pattern_simplifier(pattern)
	if simple then
		return gmatch(str, simple)
	end
	return ugmatch(str, pattern)
end

--[==[A version of gsub which uses string.gsub when possible, but otherwise uses mw.ustring.gsub.]==]
function export.gsub(str, pattern, repl, n)
	local simple = pattern_simplifier(pattern)
	if simple then
		return gsub(str, simple, repl, n)
	end
	return ugsub(str, pattern, repl, n)
end

--[==[
Like gsub, but pattern-matching facilities are turned off, so `pattern` and `repl` (if a string) are treated as literal.
]==]
function export.plain_gsub(str, pattern, repl, n)
	return gsub(str, pattern_escape(pattern), type(repl) == "string" and replacement_escape(repl) or repl, n)
end

--[==[
Reverses a UTF-8 string; equivalent to string.reverse.
]==]
function export.reverse(str)
	return reverse((gsub(str, "[\192-\255][\128-\191]*", reverse)))
end

function export.char(...) -- To be moved to [[Module:string/char]].
	return u(...)
end

do
	local function utf8_err(func_name)
		error(format("bad argument #1 to '%s' (string is not UTF-8)", func_name), 4)
	end

	local function get_codepoint(func_name, b1, b2, b3, b4)
		if b1 <= 0x7F then
			return b1, 1
		elseif not (b2 and b2 >= 0x80 and b2 <= 0xBF) then
			utf8_err(func_name)
		elseif b1 <= 0xDF then
			local cp = 0x40 * b1 + b2 - 0x3080
			return cp >= 0x80 and cp or utf8_err(func_name), 2
		elseif not (b3 and b3 >= 0x80 and b3 <= 0xBF) then
			utf8_err(func_name)
		elseif b1 <= 0xEF then
			local cp = 0x1000 * b1 + 0x40 * b2 + b3 - 0xE2080
			return cp >= 0x800 and cp or utf8_err(func_name), 3
		elseif not (b4 and b4 >= 0x80 and b4 <= 0xBF) then
			utf8_err(func_name)
		end
		local cp = 0x40000 * b1 + 0x1000 * b2 + 0x40 * b3 + b4 - 0x3C82080
		return cp >= 0x10000 and cp <= 0x10FFFF and cp or utf8_err(func_name), 4
	end

	function export.codepoint(str, i, j)
		if str == "" then
			return -- return nothing
		elseif type(str) == "number" then
			return byte(str, i, j)
		end
		i, j = i or 1, j == -1 and #str or i or 1
		if i == 1 and j == 1 then
			return (get_codepoint("codepoint", byte(str, 1, 4)))
		elseif i < 0 or j < 0 then
			return ucodepoint(str, i, j) -- FIXME
		end
		local n, nb, ret, nr = 0, 1, {}, 0
		while n < j do
			n = n + 1
			if n < i then
				local b = byte(str, nb)
				nb = nb + (b < 128 and 1 or b < 224 and 2 or b < 240 and 3 or 4)
			else
				local b1, b2, b3, b4 = byte(str, nb, nb + 3)
				if not b1 then
					break
				end
				nr = nr + 1
				local add
				ret[nr], add = get_codepoint("codepoint", b1, b2, b3, b4)
				nb = nb + add
			end
		end
		return unpack(ret)
	end
	codepoint = export.codepoint
	
	function export.gcodepoint(str, i, j)
		i, j = i or 1, j ~= -1 and j or nil
		if i < 0 or j and j < 0 then
			return ugcodepoint(str, i, j) -- FIXME
		end
		local n, nb = 1, 1
		while n < i do
			local b = byte(str, nb)
			if not b then
				break
			end
			nb = nb + (b < 128 and 1 or b < 224 and 2 or b < 240 and 3 or 4)
			n = n + 1
		end
		
		return function()
			if j and n > j then
				return nil
			end
			n = n + 1
			local b1, b2, b3, b4 = byte(str, nb, nb + 3)
			if not b1 then
				return nil
			end
			local ret, add = get_codepoint("gcodepoint", b1, b2, b3, b4)
			nb = nb + add
			return ret
		end
	end
end

do
	local _ulower = ulower

	--[==[A version of lower which uses string.lower when possible, but otherwise uses mw.ustring.lower.]==]
	function export.lower(str)
		return (match(str, "^()[^\128-\255]*$") and lower or _ulower)(str)
	end
end

do
	local _uupper = uupper

	--[==[A version of upper which uses string.upper when possible, but otherwise uses mw.ustring.upper.]==]
	function export.upper(str)
		return (match(str, "^()[^\128-\255]*$") and upper or _uupper)(str)
	end
end

do
	local function add_captures(t, n, ...)
		if ... == nil then
			return
		end
		-- Insert any captures from the splitting pattern.
		local offset, capture = n - 1, ...
		while capture do
			n = n + 1
			t[n] = capture
			capture = select(n - offset, ...)
		end
		return n
	end
	
	--[==[
	Reimplementation of mw.text.split() that includes any capturing groups in the splitting pattern. This works like
	Python's re.split() function, except that it has Lua's behavior when the split pattern is empty (i.e. advancing by
	one character at a time; Python returns the whole remainder of the string). When possible, it will use the string
	library, but otherwise uses the ustring library. There are two optional parameters: `str_lib` forces use of the
	string library, while `plain` turns any pattern matching facilities off, treating `pattern` as literal.
	
	In addition, `pattern` may be a custom find function (or callable table), which takes the input string and start
	index as its two arguments, and must return the start and end index of the match, plus any optional captures, or nil
	if there are no further matches. By default, the start index will be calculated using the ustring library, unless
	`str_lib` or `plain` is set.
	]==]
	function export.split(str, pattern_or_func, str_lib, plain)
		local iter, t, n = gsplit(str, pattern_or_func, str_lib, plain), {}, 0
		repeat
			n = add_captures(t, n, iter())
		until n == nil
		return t
	end
	export.capturing_split = export.split -- To be removed.
end

--[==[
Returns an iterator function, which iterates over the substrings returned by {split}. The first value returned is the
string up the splitting pattern, with any capture groups being returned as additional values on that iteration.
]==]
function export.gsplit(str, pattern_or_func, str_lib, plain)
	local start, final, str_len, _string, callable = 1
	pattern_or_func, str_len, _string, callable = prepare_iter(str, pattern_or_func, str_lib, plain)
	local _find, _sub = _string.find, _string.sub
	
	local function iter(loc1, loc2, ...)
		-- If no match, or there is but we're past the end of the string
		-- (which happens when the match is the empty string), then return
		-- the final chunk.
		if not loc1 then
			final = true
			return _sub(str, start)
		end
		-- Special case: If we match the empty string, then eat the
		-- next character; this avoids an infinite loop, and makes
		-- splitting by the empty string work the way mw.text.gsplit() does
		-- (including non-adjacent empty string matches with %f). If we
		-- reach the end of the string this way, set `final` to true, so we
		-- don't get stuck matching the empty string at the end.
		local chunk
		if loc2 < loc1 then
			-- If using the string library, we need to make sure we advance
			-- by one UTF-8 character.
			if _sub == sub then
				local b = byte(str, loc1)
				if b and b >= 128 then
					loc1 = loc1 + (b < 224 and 1 or b < 240 and 2 or 3)
				end
			end
			chunk = _sub(str, start, loc1)
			if loc1 >= str_len then
				final = true
			else
				start = loc1 + 1
			end
		-- Eat chunk up to the current match.
		else
			chunk = _sub(str, start, loc1 - 1)
			start = loc2 + 1
		end
		return chunk, ...
	end
	
	if callable then
		return function()
			if not final then
				return iter(pattern_or_func(str, start))
			end
		end
	-- Special case if the pattern is anchored to the start: "^" always
	-- anchors to the start position, not the start of the string, so get
	-- around this by only attempting one match with the pattern, then match
	-- the end of the string.
	elseif byte(pattern_or_func) == 0x5E then -- ^
		local returned
		return function()
			if not returned then
				returned = true
				return iter(_find(str, pattern_or_func, start, plain))
			elseif not final then
				return iter(_find(str, "$", start, plain))
			end
		end
	end
	return function()
		if not final then
			return iter(_find(str, pattern_or_func, start, plain))
		end
	end
end
gsplit = export.gsplit

function export.count(str, pattern, plain)
	if plain then
		return select(2, gsub(str, pattern_escape(pattern), ""))
	end
	local simple = pattern_simplifier(pattern)
	if simple then
		return select(2, gsub(str, pattern, ""))
	end
	return select(2, ugsub(str, pattern, ""))
end

function export.trim(str, charset, str_lib, plain)
	if charset == nil then
		-- "^.*%S" is the fastest trim algorithm except when strings only consist of characters to be trimmed, which are
		-- very slow due to catastrophic backtracking. gsub with "^%s*" gets around this by trimming such strings to ""
		-- first.
		return match(gsub(str, "^%s*", ""), "^.*%S") or ""
	elseif charset == "" then
		return str
	end
	charset = plain and ("[" .. charset_escape(charset) .. "]") or get_charset(charset)
	-- The pattern uses a non-greedy quantifier instead of the algorithm used for %s, because negative character sets
	-- are non-trivial to compute (e.g. "[^^-z]" becomes "[%^_-z]"). Plus, if the ustring library has to be used, there
	-- would be two callbacks into PHP, which is slower.
	local pattern = "^" .. charset .. "*(.-)" .. charset .. "*$"
	if not str_lib then
		local simple = pattern_simplifier(pattern)
		if not simple then
			return umatch(str, pattern)
		end
		pattern = simple
	end
	return match(str, pattern)
end
trim = export.trim

do
	local entities
	local function get_entities()
		entities, get_entities = load_data("Module:data/entities"), nil
		return entities
	end

	local function decode_entity(hash, x, code)
		if hash == "" then
			return (entities or get_entities())[x .. code]
		end
		local cp
		if x == "" then
			cp = match(code, "^()%d+$") and tonumber(code)
		else
			cp = match(code, "^()%x+$") and tonumber(code, 16)
		end
		return cp and (cp <= 0xD7FF or cp >= 0xE000 and cp <= 0x10FFFF) and u(cp) or nil
	end

	-- Non-ASCII characters aren't valid in proper HTML named entities, but MediaWiki uses them in some custom aliases
	-- which have also been included in [[Module:data/entities]].
	function export.decode_entities(str)
		local amp = find(str, "&", nil, true)
		return amp and find(str, ";", amp, true) and gsub(str, "&(#?)([xX]?)([%w\128-\255]+);", decode_entity) or str
	end
end

do
	local entities
	local function get_entities()
		-- Memoized HTML entities (taken from mw.text.lua).
		entities, get_entities = {
			["\""] = "&quot;",
			["&"] = "&amp;",
			["'"] = "&#039;",
			["<"] = "&lt;",
			[">"] = "&gt;",
			["\194\160"] = "&nbsp;",
		}, nil
		return entities
	end

	local function encode_entity(ch)
		local entity = (entities or get_entities())[ch]
		if entity == nil then
			local cp = codepoint(ch)
			-- U+D800 to U+DFFF are surrogates, so can't be encoded as entities.
			entity = cp and (cp <= 0xD7FF or cp >= 0xE000) and format("&#%d;", cp) or false
			entities[ch] = entity
		end
		return entity or nil
	end

	function export.encode_entities(str, charset, str_lib, plain)
		if charset == nil then
			return (gsub(str, "[\"&'<>\194]\160?", entities or get_entities()))
		elseif charset == "" then
			return str
		end
		local pattern = plain and ("[" .. charset_escape(charset) .. "]") or charset == "." and charset or get_charset(charset)
		if not str_lib then
			local simple = pattern_simplifier(pattern)
			if not simple then
				return (ugsub(str, pattern, encode_entity))
			end
			pattern = simple
		end
		return (gsub(str, pattern, encode_entity))
	end
end

do
	local function decode_path(code)
		return char(tonumber(code, 16))
	end
	
	local function decode(lead, trail)
		if lead == "+" or lead == "_" then
			return " " .. trail
		elseif #trail == 2 then
			return decode_path(trail)
		end
		return lead .. trail
	end
	
	function export.decode_uri(str, enctype)
		enctype = enctype and upper(enctype) or "QUERY"
		if enctype == "PATH" then
			return find(str, "%", nil, true) and gsub(str, "%%(%x%x)", decode_path) or str
		elseif enctype == "QUERY" then
			return (find(str, "%", nil, true) or find(str, "+", nil, true)) and gsub(str, "([%%%+])(%x?%x?)", decode) or str
		elseif enctype == "WIKI" then
			return (find(str, "%", nil, true) or find(str, "_", nil, true)) and gsub(str, "([%%_])(%x?%x?)", decode) or str
		end
		error("bad argument #2 to 'decode_uri' (expected QUERY, PATH, or WIKI)", 2)
	end
end

do
	local function _remove_comments(str, pre)
		local head = find(str, "<!--", nil, true)
		if not head then
			return str
		end
		local ret, n = {sub(str, 1, head - 1)}, 1
		while true do
			local loc = find(str, "-->", head + 4, true)
			if not loc then
				return pre and concat(ret) or
					concat(ret) .. sub(str, head)
			end
			head = loc + 3
			loc = find(str, "<!--", head, true)
			if not loc then
				return concat(ret) .. sub(str, head)
			end
			n = n + 1
			ret[n] = sub(str, head, loc - 1)
			head = loc
		end
	end
	
	--[==[
	Removes any HTML comments from the input text. `stage` can be one of three options:
	* {"PRE"} (default) applies the method used by MediaWiki's preprocessor: all
	  {{code|html|<nowiki><!-- ... --></nowiki>}} pairs are removed, as well as any text after an unclosed
	  {{code|html|<nowiki><!--</nowiki>}}. This is generally suitable when parsing raw template or
	  [[mw:Parser extension tags|parser extension tag]] code. (Note, however, that the actual method used by the
	  preprocessor is considerably more complex and differs under certain conditions (e.g. comments inside nowiki tags);
	  if full accuracy is absolutely necessary, use [[Module:template parser]] instead).
	* {"POST"} applies the method used to generate the final page output once all templates have been expanded: it loops
	  over the text, removing any {{code|html|<nowiki><!-- ... --></nowiki>}} pairs until no more are found (e.g.
	  {{code|html|<nowiki><!-<!-- ... -->- ... --></nowiki>}} would be fully removed), but any unclosed
	  {{code|html|<nowiki><!--</nowiki>}} is ignored. This is suitable for handling links embedded in template inputs,
	  where the {"PRE"} method will have already been applied by the native parser.
	* {"BOTH"} applies {"PRE"} then {"POST"}.
	]==]
	function export.remove_comments(str, stage)
		if not stage or stage == "PRE" then
			return _remove_comments(str, true)
		end
		local processed = stage == "POST" and _remove_comments(str) or
			stage == "BOTH" and _remove_comments(str, true) or
			error("bad argument #2 to 'remove_comments' (expected PRE, POST, or BOTH)", 2)
		while processed ~= str do
			str = processed
			processed = _remove_comments(str)
		end
		return str
	end
end

do
	local byte_escapes
	local function get_byte_escapes()
		byte_escapes, get_byte_escapes = load_data("Module:string utilities/data").byte_escapes, nil
		return byte_escapes
	end
	
	local function escape_byte(b)
		return (byte_escapes or get_byte_escapes())[b] or format("\\%03d", byte(b))
	end
	
	function export.escape_bytes(str)
		return (gsub(str, ".", escape_byte))
	end
end

function export.format_fun(str, fun)
	return (gsub(str, "{(\\?)((\\?)[^{}]*)}", function(p1, name, p2)
		if #p1 + #p2 == 1 then
			return name == "op" and "{" or
				name == "cl" and "}" or
				error(mw.getCurrentFrame():getTitle() .. " format: unrecognized escape sequence '{\\" .. name .. "}'")
		elseif fun(name) and type(fun(name)) ~= "string" then
			error(mw.getCurrentFrame():getTitle() .. " format: \"" .. name .. "\" is a " .. type(fun(name)) .. ", not a string")
		end
		return fun(name) or error(mw.getCurrentFrame():getTitle() .. " format: \"" .. name .. "\" not found in table")
	end))
end
format_fun = export.format_fun

--[==[
This function, unlike {string.format} and {mw.ustring.format}, takes just two parameters, a format string and a table,
and replaces all instances of { {param_name} } in the format string with the table's entry for {param_name}. The opening
and closing brace characters can be escaped with { {\op} } and { {\cl} }, respectively. A table entry beginning with a
slash can be escaped by doubling the initial slash.

====Examples====
* {string_utilities.format("{foo} fish, {bar} fish, {baz} fish, {quux} fish", {["foo"]="one", ["bar"]="two", ["baz"]="red", ["quux"]="blue"}) }
*: produces: {"one fish, two fish, red fish, blue fish"}
* {string_utilities.format("The set {\\op}1, 2, 3{\\cl} contains {\\\\hello} elements.", {["\\hello"]="three"})}
*: produces: {"The set {1, 2, 3} contains three elements."}
*:* Note that the single and double backslashes should be entered as double and quadruple backslashes when quoted in a literal string.
]==]
function export.format(str, tbl)
	return format_fun(str, function(key)
		return tbl[key]
	end)
end

do
	local function do_uclcfirst(str, case_func)
		-- Re-case the first letter.
		local first, remainder = match(str, "^(.[\128-\191]*)(.*)")
		return first and (case_func(first) .. remainder) or ""
	end
	
	local function uclcfirst(str, case_func)
		-- Strip off any HTML tags at the beginning. This currently does not handle comments or <ref>...</ref>
		-- correctly; it's intended for text wrapped in <span> or the like, as happens when passing text through
		-- [[Module:links]].
		local html_at_beginning = nil
		if str:match("^<") then
			while true do
				local html_tag, rest = str:match("^(<.->)(.*)$")
				if not html_tag then
					break
				end
				if not html_at_beginning then
					html_at_beginning = {}
				end
				insert(html_at_beginning, html_tag)
				str = rest
			end
		end

		-- If there's a link at the beginning, re-case the first letter of the
		-- link text. This pattern matches both piped and unpiped links.
		-- If the link is not piped, the second capture (linktext) will be empty.
		local link, linktext, remainder = match(str, "^%[%[([^|%]]+)%|?(.-)%]%](.*)$")
		local retval
		if link then
			retval = "[[" .. link .. "|" .. do_uclcfirst(linktext ~= "" and linktext or link, case_func) .. "]]" .. remainder
		else
			retval = do_uclcfirst(str, case_func)
		end
		if html_at_beginning then
			retval = concat(html_at_beginning) .. retval
		end
		return retval
	end
	
	--[==[
	Uppercase the first character of the input string, correctly handling one-part and two-part links, optionally
	surrounded by HTML tags such as `<nowiki><span>...</span></nowiki>`, possibly nested. Intended to correctly
	uppercase the first character of text that may include links that have been passed through `full_link()` in
	[[Module:links]] or a similar function.
	]==]
	function export.ucfirst(str)
		return uclcfirst(str, uupper)
	end
	ucfirst = export.ucfirst

	--[==[
	Lowercase the first character of the input string, correctly handling one-part and two-part links, optionally
	surrounded by HTML tags such as `<nowiki><span>...</span></nowiki>`, possibly nested. Intended to correctly
	lowercase the first character of text that may include links that have been passed through `full_link()` in
	[[Module:links]] or a similar function.
	]==]
	function export.lcfirst(str)
		return uclcfirst(str, ulower)
	end
	
	--[==[Capitalizes each word of the input string. WARNING: May be broken in the presence of multiword links.]==]
	function export.capitalize(str)
		-- Capitalize multi-word that is separated by spaces
		-- by uppercasing the first letter of each part.
		return (ugsub(str, "%w+", ucfirst))
	end

	local function do_title_case(first, remainder)
		first = uupper(first)
		return remainder == "" and first or (first .. ulower(remainder))
	end

	--[==[
	Capitalizes each word of the input string, with any further letters in each word being converted to lowercase.
	]==]
	function export.title_case(str)
		return str == "" and "" or ugsub(str, "(%w)(%w*)", do_title_case)
	end
	title_case = export.title_case

	--[==[
	Converts the input string to {{w|Camel case|CamelCase}}. Any non-word characters are treated as breaks between
	words. If `lower_first` is set, then the first character of the string will be lowercase (e.g. camelCase).
	]==]
	function export.camel_case(str, lower_first)
		str = ugsub(str, "%W*(%w*)", title_case)
		return lower_first and do_uclcfirst(str, ulower) or str
	end
end

do
	local function do_snake_case(nonword, word)
		return nonword == "" and word or "_" .. word
	end

	--[==[
	Converts the input string to {{w|Snake case|snake_case}}. Any non-word characters are treated as breaks between
	words.
	]==]
	function export.snake_case(str)
		return (ugsub(str, "(%W*)(%w*)", do_snake_case))
	end
end

return export